TRAK TRL-1630RX CNC Lathe
FEATURES
• 16" swing
• 30" distance between centers
• 2.12" spindle bore (1.57" for high speed model)
• Inverter driven 7.5HP motor with infinitely variable spindle speeds.
• Made in the USA
• Perfect blend and flexibility of a manual machine with the speed and precision of a CNC.
• Control can be programmed easily by any machinist without need of a trained CNC programmer.
• High precision ground ballscrews on all axes
• Electronically controlled, inverter driven spindle motor.
• Constant Surface Speed (CSS) or Inch Per Revolution operation.
• Powerful, brushless servo motors for rapid movement up to 400 IPM and ultra fine 0.000003” encoder resolution.
• Full sized, 2-speed handwheels for easy manual operation.
• 4-way joystick for easy rapid in all directions.
• Quick change 2-way dovetail, 4-station, or 8-station toolposts.
• Dynamic spindle motor brake.
• Meehanite cast base with Turcite coated hardened & ground ways.
• Chuck guard and sliding door for operator safety.
• Removable chip tray for easy machine cleaning.
(see specifications below)
TRAK TRL-1845RX CNC Lathe
FEATURES
• 18" swing
• 45" distance between centers
• 2.36” spindle bore.
• Inverter driven 10HP motor with infinitely variable spindle speeds in two speed ranges for maximum torque.
• Perfect blend and flexibility of a manual machine with the speed and precision of a CNC.
• Control can be programmed easily by any machinist without need of a trained CNC programmer.
• High precision ground ballscrews on all axes
• Electronically controlled, inverter driven spindle motor.
• Constant Surface Speed (CSS) or Inch Per Revolution operation.
• Powerful, brushless servo motors for rapid movement up to 400 IPM and ultra fine 0.000003” encoder resolution.
• Two spindle speed ranges for maximum torque at lower RPMs.
• Full sized, 2-speed handwheels for easy manual operation.
• 4-way joystick for easy rapid in all directions.
• Quick change 2-way dovetail, 4-station, or 8-station toolposts.
• Dynamic spindle motor brake.
• Meehanite cast base with Turcite coated hardened & ground ways.
• Chuck guard and sliding door for operator safety.
• Removable chip tray for easy machine cleaning.
(see specifications below)
TRAK TRL-2470RX CNC Lathe
FEATURES
• 24" swing
• 70" distance between centers
• 4.09” spindle bore.
• Inverter driven 15HP motor with infinitely variable spindle speeds in two speed ranges for maximum torque
• Perfect blend and flexibility of a manual machine with the speed and precision of a CNC.
• Control can be programmed easily by any machinist without need of a trained CNC programmer.
• High precision ground ballscrews on all axes
• Electronically controlled, inverter driven spindle motor.
• Constant Surface Speed (CSS) or Inch Per Revolution operation.
• Powerful, brushless servo motors for rapid movement up to 400 IPM and ultra fine 0.000003” encoder resolution.
• 4.09” spindle bore and large working capacity.
• Two spindle speed ranges for maximum torque at lower RPMs.
• Full sized, 2-speed handwheels for easy manual operation.
• 4-way joystick for easy rapid in all directions.
• Quick change 2-way dovetail, 4-station, or 8-station toolposts.
• Dynamic spindle motor brake.
• Meehanite cast base with Turcite coated hardened & ground ways.
• Chuck guard and sliding door for operator safety.
• Removable chip tray for easy machine cleaning.
(see specifications below)
TRAK TRL-30120RX CNC Lathe
FEATURES
• 33" swing
• 118" distance between centers
• Large 6.3” spindle bore
• Inverter driven 30HP motor with infinitely variable spindle speeds in two speed ranges for maximum torque
• Perfect blend and flexibility of a manual machine with the speed and precision of a CNC.
• Control can be programmed easily by any machinist without need of a trained CNC programmer.
• 6.3” spindle bore and large working capacity.
• Extra capacity 33” swing over bedway and 43.5” in the 15.5” gap.
• High precision ground ballscrews on all axes.
• Inverter driven 30HP spindle motor.
• Allows for two chuck (front & rear) operation.
• Two spindle speed ranges for maximum torque at lower RPMs with dynamic spindle motor brake.
• Electronically controlled spindle speed with Constant Surface Speed (CSS) or Inch Per Revolution operation.
• Powerful, brushless servo motors for rapid movement up to 400 IPM and ultra fine 0.000003” encoder resolution.
• Full sized, 2-speed handwheels for easy manual operation.
• 4-way joystick for easy rapid in all directions.
• Meehanite cast base with Turcite coated hardened & ground ways.
• Chuck guard and sliding door for operator safety.
(see specifications below)